Scotland · Cleaning

Block paving cleaning in Argyll and Bute

We quote block paving cleaning and care across Argyll and Bute and Argyll and Bute, working from photos or a quick visit to give you a fixed price.

  • 3 towns listed
  • £2.50–£5 per m² inc VAT
  • By arrangement
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

How much does a block paving cleaning job cost in Argyll and Bute?

Guide price in Argyll and Bute£2.50–£5 per m²Including VAT at 20%

In Scotland, a block paving cleaning job usually costs £2.50–£5 per m² including VAT. For a 50 m² drive, that is roughly £125–£250. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for Scotland, checked 9 November 2026.

Towns we cover in Argyll and Bute

Choose a town for local prices and details for cleaning:

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.

  • Weeds and moss removed from the joints
  • Pre-treatment where needed
  • Rotary surface clean at a pressure that will not blow out the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rinse down of edges, steps and walls

How we find the cause

  • Shade and drainage, which affect regrowth
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Moss, algae, weeds and oil staining
  • Which sealer finish suits a slope or patio
  • Walls, doors and planting to protect

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Cleaning in Argyll and Bute: questions

How much does a block paving cleaning job cost in Argyll and Bute?

Guide price for Argyll and Bute: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Do you cover Helensburgh, Dunoon and Oban?

Yes. We cover all of Argyll and Bute, including Helensburgh, Dunoon and Oban.

How often should block paving in Argyll and Bute be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then send it to us for a price from photos or a survey by arrangement. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote