Block paving cleaning in Fort William: what to expect
Fort William is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
Work in the Highlands is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a block paving cleaning job cost in Fort William?
For Fort William, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Weeds and moss removed from the joints
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
- Optional biocide and sealer
- Rinse down of edges, steps and walls
What we look at first in Fort William
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
- Type of block and its age
- Moss, algae, weeds and oil staining
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Cleaning in Fort William: questions
Do you cover Oban?
Yes. We cover Fort William and the places around it, including Oban, and the rest of the Highlands.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Fort William be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Cleaning near Fort William
Nearby towns we cover for cleaning, and cleaning across Highlands:
