Block paving sealing in Burgess Hill: what to expect
Burgess Hill is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paving sealing job cost in Burgess Hill?
Expect block paving sealing jobs in Burgess Hill to come in at around £5.50–£16 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £270 and £810.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
What we look at first in Burgess Hill
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
- Moss, algae, weeds and oil staining
- Walls, doors and planting to protect
- Type of block and its age
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Sealing in Burgess Hill: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Haywards Heath, Crawley and Horsham?
Yes. We cover Burgess Hill and the places around it, including Haywards Heath, Crawley and Horsham, and the rest of West Sussex.
How much does a block paving sealing job cost in Burgess Hill?
Guide price for Burgess Hill: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Burgess Hill be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Burgess Hill
Nearby towns we cover for sealing, and sealing across West Sussex:
- Sealing in Haywards Heath
- Sealing in Crawley
- Sealing in Horsham
- Sealing in East Grinstead
- Sealing in Worthing
- Sealing in Littlehampton
