West Sussex · Block paved driveways

Block paving driveways in Burgess Hill

If you are in Burgess Hill (RH15, BN6, BN45, BN5) and want a block paved driveway, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes RH15, BN6, BN45
  • £90–£150 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Burgess Hill: the local picture

Burgess Hill is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paved driveway cost in Burgess Hill?

Guide price in Burgess Hill£90–£150 per m²Including VAT at 20%

Most block paved driveway quotes in the South East fall within £90–£150 per m² including VAT. A 50 m² double drive would usually be about £4,600–£7,550, with any extras listed separately on your quote.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Cuts at edges, around covers and against the house
  • Edge restraints or kerbs bedded and haunched in concrete
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Crushed-stone sub-base laid in layers and compacted

What the survey covers

  • Existing manhole and inspection covers, and whether to recess them
  • Edges against lawns, beds, walls and neighbours
  • Access for a mini-digger, skip or grab lorry
  • Whether front-garden planning rules apply
  • The kerb: is it already dropped, and is it wide enough?

Rules for front drives in Burgess Hill

Burgess Hill is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Block paved driveways in Burgess Hill: questions

Do you cover Haywards Heath, Crawley and Horsham?

Yes. We cover Burgess Hill and the places around it, including Haywards Heath, Crawley and Horsham, and the rest of West Sussex.

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Can you match the blocks to my house in Burgess Hill?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Do I need planning permission for a block paved driveway in Burgess Hill?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Block paved driveways near Burgess Hill

Nearby towns we cover for block paved driveways, and block paved driveways across West Sussex:

Other block paving services in Burgess Hill

Or see all block paving services in Burgess Hill.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Burgess Hill, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote