West Sussex · Permeable paving

Permeable block paving in Burgess Hill

Block paving suits homes in Burgess Hill because it can be repaired a block at a time and looks right for decades when the base underneath is built properly.

  • Postcodes RH15, BN6, BN45
  • £115–£185 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Permeable block paving in Burgess Hill: the local picture

In Burgess Hill, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a permeable block drive cost in Burgess Hill?

Guide price in Burgess Hill£115–£185 per m²Including VAT at 20%

Most permeable block drive quotes in the South East fall within £115–£185 per m² including VAT. A 50 m² drive would usually be about £5,650–£9,200, with any extras listed separately on your quote.

ItemGuide price inc VAT
Permeable block paving driveway£115–£185 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our permeable paving service

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Geotextile layer where the design needs one
  • Ground check: how well the soil drains and how high the water table sits
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Grit laying course and permeable blocks with grit-filled joints
  • Edge restraints and any overflow or outlet the design needs

Before we price your permeable block drive

  • Access for a mini-digger, skip or grab lorry
  • Edges against lawns, beds, walls and neighbours
  • Trees and roots near the drive
  • Whether front-garden planning rules apply
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Planning and kerb rules in Burgess Hill

Burgess Hill is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Permeable paving in Burgess Hill: questions

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Can you match the blocks to my house in Burgess Hill?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Do you cover Haywards Heath, Crawley and Horsham?

Yes. We cover Burgess Hill and the places around it, including Haywards Heath, Crawley and Horsham, and the rest of West Sussex.

Permeable paving near Burgess Hill

Nearby towns we cover for permeable paving, and permeable paving across West Sussex:

Other block paving services in Burgess Hill

Or see all block paving services in Burgess Hill.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Burgess Hill, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote