Block paving sealing in Horsham: the local picture
Horsham is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paving sealing job cost in Horsham?
For Horsham, our guide is £5.50–£16 per m² including VAT, so a 50 m² drive is likely to be £270–£810. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Second coat where the product requires it
Before we price your block paving sealing job
- Which sealer finish suits a slope or patio
- Walls, doors and planting to protect
- Moss, algae, weeds and oil staining
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Horsham: questions
Do you cover Crawley, Haywards Heath and Burgess Hill?
Yes. We cover Horsham and the places around it, including Crawley, Haywards Heath and Burgess Hill, and the rest of West Sussex.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Horsham be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Horsham?
Guide price for Horsham: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Sealing near Horsham
Nearby towns we cover for sealing, and sealing across West Sussex:
- Sealing in Crawley
- Sealing in Haywards Heath
- Sealing in Burgess Hill
- Sealing in East Grinstead
- Sealing in Worthing
- Sealing in Littlehampton
