Planning a block paving sealing job in Worthing
Worthing has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a block paving sealing job cost in Worthing?
In the South East, a block paving sealing job usually costs £5.50–£16 per m² including VAT. For a 50 m² drive, that is roughly £270–£810. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
- Second coat where the product requires it
What we look at first in Worthing
- Shade and drainage, which affect regrowth
- How much joint sand is left
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Which sealer finish suits a slope or patio
- Whether any blocks are loose or sunken first
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Worthing: questions
How often should block paving in Worthing be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Littlehampton, Bognor Regis and Burgess Hill?
Yes. We cover Worthing and the places around it, including Littlehampton, Bognor Regis and Burgess Hill, and the rest of West Sussex.
How much does a block paving sealing job cost in Worthing?
Guide price for Worthing: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Sealing near Worthing
Nearby towns we cover for sealing, and sealing across West Sussex:
- Sealing in Littlehampton
- Sealing in Bognor Regis
- Sealing in Burgess Hill
- Sealing in Horsham
- Sealing in Haywards Heath
- Sealing in Chichester
