What to know before a block paved driveway in Billingham
Homes in Billingham include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a block paved driveway cost in Billingham?
For Billingham, our guide is £75–£125 per m² including VAT, so a 50 m² double drive is likely to be £3,850–£6,300. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £75–£125 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Cuts at edges, around covers and against the house
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Survey, measurements and a written, itemised quote
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
Before we price your block paved driveway
- Whether front-garden planning rules apply
- Edges against lawns, beds, walls and neighbours
- Block range, thickness, colour and pattern to suit the house
- The kerb: is it already dropped, and is it wide enough?
- Ground conditions under the old surface and how deep the sub-base must be
Rules for front drives in Billingham
Billingham is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Block paved driveways in Billingham: questions
Do you cover Stockton-on-Tees, Hartlepool and Darlington?
Yes. We cover Billingham and the places around it, including Stockton-on-Tees, Hartlepool and Darlington, and the rest of County Durham.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a block paved driveway cost in Billingham?
Our guide for Billingham is £75–£125 per m² including VAT, so a 50 m² double drive is usually about £3,850–£6,300. Your fixed price follows the survey.
Can you match the blocks to my house in Billingham?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Block paved driveways near Billingham
Nearby towns we cover for block paved driveways, and block paved driveways across County Durham:
- Block paved driveways in Stockton-on-Tees
- Block paved driveways in Hartlepool
- Block paved driveways in Darlington
- Block paved driveways in Newton Aycliffe
- Block paved driveways in Peterlee
- Block paved driveways in Bishop Auckland
