Planning a block paving repair in Billingham
Homes in Billingham include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a block paving repair cost in Billingham?
Most block paving repair quotes in the North East fall within £180–£590 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Small repair (a few blocks or a short trench) | £180–£590 |
| Sunken or rutted patch repaired | £270–£1,100 |
| Lift and re-lay on a sound base | £30–£70 per m² |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving repair involve?
Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.
- Re-jointing and compaction of the repaired area
- Damaged blocks cut out without breaking neighbours
- Replacement blocks matched as closely as possible, or sound blocks re-used
- Laying course corrected and re-screeded
- Diagnosis from photos or a visit
How we find the cause
- What caused the dip or movement: base, laying course, edging or drains
- How much of the area needs lifting to blend the repair
- Falls, so water does not collect again
- Replacement blocks or hidden blocks to swap in
- Trees, roots and past trenches
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repairs in Billingham: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you repair block paving in Billingham without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Do you cover Stockton-on-Tees, Hartlepool and Darlington?
Yes. We cover Billingham and the places around it, including Stockton-on-Tees, Hartlepool and Darlington, and the rest of County Durham.
How much does a block paving repair cost in Billingham?
Our guide is £180–£590 including VAT. Small repairs are often priced from photos.
Repairs near Billingham
Nearby towns we cover for repairs, and repairs across County Durham:
- Repairs in Stockton-on-Tees
- Repairs in Hartlepool
- Repairs in Darlington
- Repairs in Newton Aycliffe
- Repairs in Peterlee
- Repairs in Bishop Auckland
