Replacing tarmac or concrete with block paving in Billingham: the local picture
In Billingham, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a replacement block drive cost in Billingham?
Expect replacement block drives in Billingham to come in at around £85–£160 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £3,850 and £7,300.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £85–£160 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Levels set below the damp-proof course with falls away from the house
- Break-out of the old surface with waste removal and skip or grab lorry
- Assessment of the old base: keep, top up or replace
- Drainage added where the old drive sent water to the house or road
- New edging, sub-base where needed, and the block drive
What we check on a Billingham survey
- Existing manhole and inspection covers, and whether to recess them
- Where an electric vehicle charger cable might run
- Ground conditions under the old surface and how deep the sub-base must be
- Whether front-garden planning rules apply
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Planning and kerb rules in Billingham
Billingham is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Replace an old drive in Billingham: questions
Do I need planning permission for a replacement block drive in Billingham?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Billingham?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Is the survey in Billingham free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Do you cover Stockton-on-Tees, Hartlepool and Darlington?
Yes. We cover Billingham and the places around it, including Stockton-on-Tees, Hartlepool and Darlington, and the rest of County Durham.
Replace an old drive near Billingham
Nearby towns we cover for replace an old drive, and replace an old drive across County Durham:
- Replace an old drive in Stockton-on-Tees
- Replace an old drive in Hartlepool
- Replace an old drive in Darlington
- Replace an old drive in Newton Aycliffe
- Replace an old drive in Peterlee
- Replace an old drive in Bishop Auckland
