County Durham · Block paved driveways

Block paving driveways in Newton Aycliffe

Our block paving driveways service covers Newton Aycliffe and nearby Bishop Auckland, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes DL5, DL17
  • £75–£125 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Planning a block paved driveway in Newton Aycliffe

In Newton Aycliffe, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Wind-driven rain on the North East coast makes falls and a well-filled joint more important.

How much does a block paved driveway cost in Newton Aycliffe?

Guide price in Newton Aycliffe£75–£125 per m²Including VAT at 20%

For Newton Aycliffe, our guide is £75–£125 per m² including VAT, so a 50 m² double drive is likely to be £3,850–£6,300. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£75–£125 per m²
Breaking out an old surface£9–£35 per m²
Edging or kerb, bedded and haunched£18–£45 per metre
Typical channel drain run£320–£900
Dropped kerb (vehicle crossover) construction£900–£2,700

Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Crushed-stone sub-base laid in layers and compacted
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Cuts at edges, around covers and against the house

What the survey covers

  • Existing manhole and inspection covers, and whether to recess them
  • Trees and roots near the drive
  • The kerb: is it already dropped, and is it wide enough?
  • Steps, thresholds and door heights
  • Edges against lawns, beds, walls and neighbours

Planning and kerb rules in Newton Aycliffe

Newton Aycliffe is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Block paved driveways in Newton Aycliffe: questions

Do you cover Bishop Auckland, Darlington and Stockton-on-Tees?

Yes. We cover Newton Aycliffe and the places around it, including Bishop Auckland, Darlington and Stockton-on-Tees, and the rest of County Durham.

How much does a block paved driveway cost in Newton Aycliffe?

Our guide for Newton Aycliffe is £75–£125 per m² including VAT, so a 50 m² double drive is usually about £3,850–£6,300. Your fixed price follows the survey.

Is the survey in Newton Aycliffe free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Block paved driveways near Newton Aycliffe

Nearby towns we cover for block paved driveways, and block paved driveways across County Durham:

Other block paving services in Newton Aycliffe

Or see all block paving services in Newton Aycliffe.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote