What to know before a block paved driveway in Mold
In and around Mold, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paved driveway cost in Mold?
In Wales, a block paved driveway usually costs £80–£130 per m² including VAT. For a 50 m² double drive, that is roughly £3,950–£6,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £80–£130 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Sharp-sand laying course screeded to falls
- Cuts at edges, around covers and against the house
- Crushed-stone sub-base laid in layers and compacted
- Removal of the old surface and soil to the agreed depth, with waste taken away
Before we price your block paved driveway
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Block range, thickness, colour and pattern to suit the house
- Where rain will go: falls, lawn, border, channel or soakaway
- Whether front-garden planning rules apply
- Where an electric vehicle charger cable might run
Do you need permission in Mold?
Mold is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Block paved driveways in Mold: questions
Do I need planning permission for a block paved driveway in Mold?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover Buckley, Deeside and Hawarden?
Yes. We cover Mold and the places around it, including Buckley, Deeside and Hawarden, and the rest of Clwyd.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Mold
Nearby towns we cover for block paved driveways, and block paved driveways across Clwyd:
- Block paved driveways in Buckley
- Block paved driveways in Deeside
- Block paved driveways in Hawarden
- Block paved driveways in Flint
- Block paved driveways in Wrexham
- Block paved driveways in Rhosllannerchrugog
