Planning a sunken area repair in Mold
In and around Mold, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a sunken area repair cost in Mold?
Most sunken area repair quotes in Wales fall within £280–£1,100 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £280–£1,100 |
| Small repair (a few blocks or a short trench) | £185–£600 |
| Lift and re-lay on a sound base | £35–£75 per m² |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- New laying course screeded to the correct level and falls
- Sub-base dug out and rebuilt where it has failed
- Investigation of the cause (drain, sub-base, laying course, edging)
- Same blocks relaid, re-jointed and compacted
- Blocks lifted, cleaned and stacked for re-use
How we find the cause
- Whether a drain or gully is leaking under the paving
- Trees, roots and past trenches
- Whether the edging has moved or was never set in concrete
- Falls, so water does not collect again
- How much of the area needs lifting to blend the repair
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sunken paving in Mold: questions
Can you repair block paving in Mold without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Buckley, Deeside and Hawarden?
Yes. We cover Mold and the places around it, including Buckley, Deeside and Hawarden, and the rest of Clwyd.
Sunken paving near Mold
Nearby towns we cover for sunken paving, and sunken paving across Clwyd:
- Sunken paving in Buckley
- Sunken paving in Deeside
- Sunken paving in Hawarden
- Sunken paving in Flint
- Sunken paving in Wrexham
- Sunken paving in Rhosllannerchrugog
