Block paving sealing in Mold: what to expect
Around Mold, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paving sealing job cost in Mold?
Most block paving sealing job quotes in Wales fall within £4.50–£14 per m² including VAT. A 50 m² drive would usually be about £235–£700, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
Before we price your block paving sealing job
- Moss, algae, weeds and oil staining
- Type of block and its age
- Shade and drainage, which affect regrowth
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Mold: questions
Do you cover Buckley, Deeside and Hawarden?
Yes. We cover Mold and the places around it, including Buckley, Deeside and Hawarden, and the rest of Clwyd.
How much does a block paving sealing job cost in Mold?
Guide price for Mold: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Mold be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Mold
Nearby towns we cover for sealing, and sealing across Clwyd:
- Sealing in Buckley
- Sealing in Deeside
- Sealing in Hawarden
- Sealing in Flint
- Sealing in Wrexham
- Sealing in Rhosllannerchrugog
