Block paving cleaning in Mold: what to expect
Around Mold, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a block paving cleaning job cost in Mold?
In Wales, a block paving cleaning job usually costs £2.50–£4.50 per m² including VAT. For a 50 m² drive, that is roughly £115–£235. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
| Sealing only | £4.50–£14 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rinse down of edges, steps and walls
- Optional biocide and sealer
How we find the cause
- Moss, algae, weeds and oil staining
- How much joint sand is left
- Walls, doors and planting to protect
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Cleaning in Mold: questions
How much does a block paving cleaning job cost in Mold?
Guide price for Mold: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Mold be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Cleaning near Mold
Nearby towns we cover for cleaning, and cleaning across Clwyd:
- Cleaning in Buckley
- Cleaning in Deeside
- Cleaning in Hawarden
- Cleaning in Flint
- Cleaning in Wrexham
- Cleaning in Rhosllannerchrugog
