What to know before a block paved driveway in Ellesmere Port
Homes in Ellesmere Port include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a block paved driveway cost in Ellesmere Port?
Expect block paved driveways in Ellesmere Port to come in at around £85–£140 per m², including VAT at 20%. As an example, a 50 m² double drive usually comes to between £4,250 and £7,000.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Survey, measurements and a written, itemised quote
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Crushed-stone sub-base laid in layers and compacted
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
What we check on an Ellesmere Port survey
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
- Where an electric vehicle charger cable might run
- Access for a mini-digger, skip or grab lorry
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Rules for front drives in Ellesmere Port
Ellesmere Port is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Block paved driveways in Ellesmere Port: questions
How much does a block paved driveway cost in Ellesmere Port?
Our guide for Ellesmere Port is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a block paved driveway in Ellesmere Port?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Block paved driveways near Ellesmere Port
Nearby towns we cover for block paved driveways, and block paved driveways across Cheshire:
- Block paved driveways in Chester
- Block paved driveways in Runcorn
- Block paved driveways in Widnes
- Block paved driveways in Warrington
- Block paved driveways in Northwich
- Block paved driveways in Winsford
