Block paving driveways in Chester: the local picture
Chester has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a block paved driveway cost in Chester?
In the North West, a block paved driveway usually costs £85–£140 per m² including VAT. For a 50 m² double drive, that is roughly £4,250–£7,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Cuts at edges, around covers and against the house
- Sharp-sand laying course screeded to falls
- Survey, measurements and a written, itemised quote
- Edge restraints or kerbs bedded and haunched in concrete
Before we price your block paved driveway
- Edges against lawns, beds, walls and neighbours
- Trees and roots near the drive
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Access for a mini-digger, skip or grab lorry
- Ground conditions under the old surface and how deep the sub-base must be
Planning and kerb rules in Chester
Chester is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Block paved driveways in Chester: questions
Do I need planning permission for a block paved driveway in Chester?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Is the survey in Chester free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do you cover Ellesmere Port, Runcorn and Widnes?
Yes. We cover Chester and the places around it, including Ellesmere Port, Runcorn and Widnes, and the rest of Cheshire.
Block paved driveways near Chester
Nearby towns we cover for block paved driveways, and block paved driveways across Cheshire:
- Block paved driveways in Ellesmere Port
- Block paved driveways in Runcorn
- Block paved driveways in Widnes
- Block paved driveways in Winsford
- Block paved driveways in Northwich
- Block paved driveways in Warrington
