What to know before a block paved patio in Chester
Chester has everything from small terrace yards to big gardens on newer estates, so the survey sets the layout, the levels and the dig.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paved patio cost in Chester?
Most block paved patio quotes in the North West fall within £80–£140 per m² including VAT. A 20 m² patio would usually be about £1,850–£3,200, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Block paved patio (concrete block) | £80–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Step with block or brick riser and paved tread | £180–£350 per step |
| Typical channel drain run | £350–£1,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Block suits patios that join a block drive or path, small or awkward spaces where large slabs would need too many cuts, and gardens where you want a pattern such as basketweave or a circle feature. We lay patios to fall away from the house and below the damp-proof course, with edging that stops the blocks creeping into the lawn.
- Jointing sand and compaction
- Falls away from the house and doors
- Blocks in your pattern, edges and cuts
- Optional sealer
- Dig-out and compacted sub-base (around 100 mm for foot traffic)
What the survey covers
- Steps, walls and changes of level
- Manhole and inspection covers in the area
- Ground conditions and how deep the dig must be
- Access for a mini-digger and how waste leaves the garden
- Levels against the damp-proof course and door thresholds
Do you need permission for a block paved patio in Chester?
A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.
Paving in front of the house follows the front-garden rules: in England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Patios in Chester: questions
How much does a block paved patio cost in Chester?
Our guide for Chester is £80–£140 per m² including VAT, so a 20 m² patio is usually about £1,850–£3,200. Your fixed price follows the survey.
How long does a block paved patio take?
Most patios and paths take two to five working days, depending on the size, any steps and the dig. Your quote gives the expected duration.
Can the paving be level with the back door?
Paving normally sits at least 150 mm below the damp-proof course. A level step-out needs a drainage channel against the house and careful detailing, which we agree on the survey.
What happens to my old patio or lawn?
Old slabs, concrete or turf are dug out and taken away, listed as its own line on your quote.
Patios near Chester
Nearby towns we cover for patios, and patios across Cheshire:
- Patios in Ellesmere Port
- Patios in Runcorn
- Patios in Widnes
- Patios in Winsford
- Patios in Northwich
- Patios in Warrington
