Sunken and rutted block paving in Ellesmere Port: the local picture
In Ellesmere Port, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a sunken area repair cost in Ellesmere Port?
Most sunken area repair quotes in the North West fall within £300–£1,200 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sunken paving service
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
- Blocks lifted, cleaned and stacked for re-use
- Same blocks relaid, re-jointed and compacted
- Sub-base dug out and rebuilt where it has failed
Before we price your sunken area repair
- Whether a drain or gully is leaking under the paving
- Replacement blocks or hidden blocks to swap in
- How much of the area needs lifting to blend the repair
- Whether the edging has moved or was never set in concrete
- What caused the dip or movement: base, laying course, edging or drains
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sunken paving in Ellesmere Port: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
How much does a sunken area repair cost in Ellesmere Port?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Do you cover Chester, Runcorn and Widnes?
Yes. We cover Ellesmere Port and the places around it, including Chester, Runcorn and Widnes, and the rest of Cheshire.
Can you repair block paving in Ellesmere Port without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Sunken paving near Ellesmere Port
Nearby towns we cover for sunken paving, and sunken paving across Cheshire:
- Sunken paving in Chester
- Sunken paving in Runcorn
- Sunken paving in Widnes
- Sunken paving in Warrington
- Sunken paving in Northwich
- Sunken paving in Winsford
