Cheshire · Dropped kerbs

Dropped kerbs with a new drive in Ellesmere Port

We quote dropped kerbs across Ellesmere Port and Cheshire, matched to the levels of your paving.

  • Postcodes CH65, CH66, CH64
  • £1,000–£3,000 inc VAT
  • Free survey for new paving
Lowered kerb on a residential pavement leading to a charcoal block paved driveway

Dropped kerbs with a new drive in Ellesmere Port: the local picture

Homes in Ellesmere Port include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a dropped kerb cost in Ellesmere Port?

Guide price in Ellesmere Port£1,000–£3,000Including VAT at 20%

Guide price in Ellesmere Port: £1,000–£3,000 including VAT. These are North West guide figures; the survey or your photos confirm the real price before you commit.

ItemGuide price inc VAT
Dropped kerb (vehicle crossover) construction£1,000–£3,000
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Soakaway£900–£2,000
Highway authority dropped kerb application fee£55–£500

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What does a dropped kerb involve?

A dropped kerb, also called a vehicle crossover, is a section of lowered kerb with a strengthened footway behind it so a car can cross the pavement to reach a drive. It is part of the public highway, so it needs the highway authority's permission and has to be built to their specification, usually by a contractor they approve.

  • Coordination so the drive and crossover are finished together
  • Eligibility check: visibility, trees, street furniture, frontage depth
  • Crossover construction where the authority permits our contractor
  • Drive levels set to meet the new kerb line
  • Help with the highway authority application and drawings

What the survey covers

  • Access and working space
  • Ground conditions for any soakaway
  • Who must approve the work and how long that takes
  • Load ratings needed for covers and gratings
  • Buried services near the crossing or channel

Planning and kerb rules in Ellesmere Port

Ellesmere Port is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Dropped kerbs in Ellesmere Port: questions

Can this be done at the same time as a new drive in Ellesmere Port?

Yes, and it usually should be, so the levels match and the paving is only disturbed once.

Do you work in Chester, Runcorn and Widnes?

Yes. We cover Ellesmere Port and the places around it, including Chester, Runcorn and Widnes, and the rest of Cheshire.

How much does a dropped kerb cost in Ellesmere Port?

Guide price: £1,000–£3,000 including VAT. The survey confirms the work needed.

Who approves a dropped kerb in Ellesmere Port?

For a dropped kerb, your local highway authority (usually your council). For drainage and covers on private land, no approval is usually needed, but connections to public sewers need the water company's consent.

Dropped kerbs near Ellesmere Port

Nearby towns we cover for dropped kerbs, and dropped kerbs across Cheshire:

Other block paving services in Ellesmere Port

Or see all block paving services in Ellesmere Port.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Ellesmere Port.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote