Sunken and rutted block paving in Bridgwater: the local picture
In Bridgwater, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a sunken area repair cost in Bridgwater?
In the South West, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Blocks lifted, cleaned and stacked for re-use
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
- Sub-base dug out and rebuilt where it has failed
- Same blocks relaid, re-jointed and compacted
How we find the cause
- Condition and thickness of your existing blocks
- Whether the edging has moved or was never set in concrete
- How much of the area needs lifting to blend the repair
- Falls, so water does not collect again
- What caused the dip or movement: base, laying course, edging or drains
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sunken paving in Bridgwater: questions
Do you cover Burnham-on-Sea, Taunton and Weston-super-Mare?
Yes. We cover Bridgwater and the places around it, including Burnham-on-Sea, Taunton and Weston-super-Mare, and the rest of Somerset.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
How much does a sunken area repair cost in Bridgwater?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Sunken paving near Bridgwater
Nearby towns we cover for sunken paving, and sunken paving across Somerset:
- Sunken paving in Burnham-on-Sea
- Sunken paving in Taunton
- Sunken paving in Weston-super-Mare
- Sunken paving in Yeovil
- Sunken paving in Clevedon
- Sunken paving in Nailsea
