Block paving sealing in Bridgwater: the local picture
In Bridgwater, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Sloping plots are common in the South West, which affects edging, steps and where the water runs.
How much does a block paving sealing job cost in Bridgwater?
Guide price in Bridgwater: £5–£15 per m² including VAT, which puts a 50 m² drive at about £250–£750. These are South West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Second coat where the product requires it
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
How we find the cause
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- Type of block and its age
- Shade and drainage, which affect regrowth
- Which sealer finish suits a slope or patio
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Bridgwater: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Burnham-on-Sea, Taunton and Weston-super-Mare?
Yes. We cover Bridgwater and the places around it, including Burnham-on-Sea, Taunton and Weston-super-Mare, and the rest of Somerset.
How much does a block paving sealing job cost in Bridgwater?
Guide price for Bridgwater: £5–£15 per m² including VAT, with a minimum charge for small areas.
Sealing near Bridgwater
Nearby towns we cover for sealing, and sealing across Somerset:
- Sealing in Burnham-on-Sea
- Sealing in Taunton
- Sealing in Weston-super-Mare
- Sealing in Yeovil
- Sealing in Clevedon
- Sealing in Nailsea
