Sunken and rutted block paving in Burnham-on-Sea: the local picture
Burnham-on-Sea is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a sunken area repair cost in Burnham-on-Sea?
In the South West, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- Sub-base dug out and rebuilt where it has failed
- Investigation of the cause (drain, sub-base, laying course, edging)
- Blocks lifted, cleaned and stacked for re-use
- Same blocks relaid, re-jointed and compacted
- New laying course screeded to the correct level and falls
Before we price your sunken area repair
- Falls, so water does not collect again
- Condition and thickness of your existing blocks
- Whether the edging has moved or was never set in concrete
- What caused the dip or movement: base, laying course, edging or drains
- Replacement blocks or hidden blocks to swap in
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sunken paving in Burnham-on-Sea: questions
How much does a sunken area repair cost in Burnham-on-Sea?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you repair block paving in Burnham-on-Sea without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Sunken paving near Burnham-on-Sea
Nearby towns we cover for sunken paving, and sunken paving across Somerset:
- Sunken paving in Weston-super-Mare
- Sunken paving in Bridgwater
- Sunken paving in Clevedon
- Sunken paving in Taunton
- Sunken paving in Nailsea
- Sunken paving in Portishead
