Planning a sunken area repair in Rochester
Rochester is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a sunken area repair cost in Rochester?
Guide price in Rochester: £320–£1,300 including VAT. These are South East guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £320–£1,300 |
| Small repair (a few blocks or a short trench) | £215–£700 |
| Lift and re-lay on a sound base | £40–£85 per m² |
| Lift and re-lay with sub-base rebuilt | £65–£120 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Investigation of the cause (drain, sub-base, laying course, edging)
- New laying course screeded to the correct level and falls
- Blocks lifted, cleaned and stacked for re-use
- Sub-base dug out and rebuilt where it has failed
- Same blocks relaid, re-jointed and compacted
What we look at first in Rochester
- Trees, roots and past trenches
- How much of the area needs lifting to blend the repair
- Whether a drain or gully is leaking under the paving
- What caused the dip or movement: base, laying course, edging or drains
- Replacement blocks or hidden blocks to swap in
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Sunken paving in Rochester: questions
How much does a sunken area repair cost in Rochester?
Our guide is £320–£1,300 including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Do you cover Strood, Gillingham and Gravesend?
Yes. We cover Rochester and the places around it, including Strood, Gillingham and Gravesend, and the rest of Kent.
Can you repair block paving in Rochester without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Sunken paving near Rochester
Nearby towns we cover for sunken paving, and sunken paving across Kent:
- Sunken paving in Strood
- Sunken paving in Gillingham
- Sunken paving in Gravesend
- Sunken paving in Maidstone
- Sunken paving in Sittingbourne
- Sunken paving in Dartford
