Kent · Repairs

Block paving repairs in Rochester

When a block drive in Rochester or nearby Strood starts to dip or rattle, the blocks are rarely the problem; the bed and base usually are.

  • Postcodes ME1
  • £215–£700 inc VAT
  • Free survey for new paving
Gloved hands lifting a cracked block out of a grey block paved driveway to replace it

Block paving repairs in Rochester: the local picture

In Rochester, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving repair cost in Rochester?

Guide price in Rochester£215–£700Including VAT at 20%

Most block paving repair quotes in the South East fall within £215–£700 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Small repair (a few blocks or a short trench)£215–£700
Sunken or rutted patch repaired£320–£1,300
Lift and re-lay on a sound base£40–£85 per m²
Lift and re-lay with sub-base rebuilt£65–£120 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our repairs service

Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.

  • Re-jointing and compaction of the repaired area
  • Replacement blocks matched as closely as possible, or sound blocks re-used
  • Damaged blocks cut out without breaking neighbours
  • Laying course corrected and re-screeded
  • Diagnosis from photos or a visit

What we look at first in Rochester

  • How much of the area needs lifting to blend the repair
  • What caused the dip or movement: base, laying course, edging or drains
  • Falls, so water does not collect again
  • Trees, roots and past trenches
  • Replacement blocks or hidden blocks to swap in

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repairs in Rochester: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

How much does a block paving repair cost in Rochester?

Our guide is £215–£700 including VAT. Small repairs are often priced from photos.

Do you cover Strood, Gillingham and Gravesend?

Yes. We cover Rochester and the places around it, including Strood, Gillingham and Gravesend, and the rest of Kent.

Repairs near Rochester

Nearby towns we cover for repairs, and repairs across Kent:

Other block paving services in Rochester

Or see all block paving services in Rochester.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote