Block paving cleaning in Rochester: what to expect
In Rochester, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paving cleaning job cost in Rochester?
For Rochester, our guide is £2.50–£5.50 per m² including VAT, so a 50 m² drive is likely to be £135–£270. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Optional biocide and sealer
- Rinse down of edges, steps and walls
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Weeds and moss removed from the joints
How we find the cause
- Shade and drainage, which affect regrowth
- Moss, algae, weeds and oil staining
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Type of block and its age
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Cleaning in Rochester: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Rochester be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving cleaning job cost in Rochester?
Guide price for Rochester: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.
Do you cover Strood, Gillingham and Gravesend?
Yes. We cover Rochester and the places around it, including Strood, Gillingham and Gravesend, and the rest of Kent.
Cleaning near Rochester
Nearby towns we cover for cleaning, and cleaning across Kent:
- Cleaning in Strood
- Cleaning in Gillingham
- Cleaning in Gravesend
- Cleaning in Maidstone
- Cleaning in Sittingbourne
- Cleaning in Dartford
