Kent · Cleaning

Block paving cleaning in Strood

For drives and patios in Strood and Rochester, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • Postcodes ME2, ME6
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Strood

In Strood, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving cleaning job cost in Strood?

Guide price in Strood£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the South East fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £135–£270, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed
  • Optional biocide and sealer
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rinse down of edges, steps and walls

Before we price your block paving cleaning job

  • Whether any blocks are loose or sunken first
  • Moss, algae, weeds and oil staining
  • Type of block and its age
  • Which sealer finish suits a slope or patio
  • Shade and drainage, which affect regrowth

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Cleaning in Strood: questions

How often should block paving in Strood be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Do you cover Rochester, Gillingham and Gravesend?

Yes. We cover Strood and the places around it, including Rochester, Gillingham and Gravesend, and the rest of Kent.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Cleaning near Strood

Nearby towns we cover for cleaning, and cleaning across Kent:

Other block paving services in Strood

Or see all block paving services in Strood.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote