Sunken and rutted block paving in Gillingham: the local picture
Gillingham has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a sunken area repair cost in Gillingham?
In the South East, a sunken area repair usually costs £320–£1,300 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £320–£1,300 |
| Small repair (a few blocks or a short trench) | £215–£700 |
| Lift and re-lay on a sound base | £40–£85 per m² |
| Lift and re-lay with sub-base rebuilt | £65–£120 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Blocks lifted, cleaned and stacked for re-use
- Same blocks relaid, re-jointed and compacted
- Sub-base dug out and rebuilt where it has failed
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
Before we price your sunken area repair
- Falls, so water does not collect again
- Condition and thickness of your existing blocks
- Trees, roots and past trenches
- How much of the area needs lifting to blend the repair
- Replacement blocks or hidden blocks to swap in
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Sunken paving in Gillingham: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
How much does a sunken area repair cost in Gillingham?
Our guide is £320–£1,300 including VAT. Small repairs are often priced from photos.
Do you cover Rochester, Strood and Gravesend?
Yes. We cover Gillingham and the places around it, including Rochester, Strood and Gravesend, and the rest of Kent.
Sunken paving near Gillingham
Nearby towns we cover for sunken paving, and sunken paving across Kent:
- Sunken paving in Rochester
- Sunken paving in Strood
- Sunken paving in Gravesend
- Sunken paving in Maidstone
- Sunken paving in Sittingbourne
- Sunken paving in Dartford
