Kent · Lift and re-lay

Lift and re-lay block paving in Gillingham

When a block drive in Gillingham or nearby Rochester starts to dip or rattle, the blocks are rarely the problem; the bed and base usually are.

  • Postcodes ME7, ME4, ME5
  • £40–£85 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Gillingham: what to expect

Across Gillingham, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a lift and re-lay job cost in Gillingham?

Guide price in Gillingham£40–£85 per m²Including VAT at 20%

Expect lift and re-lay jobs in Gillingham to come in at around £40–£85 per m², including VAT at 20%. As an example, 30 m² re-laid usually comes to between £1,150 and £2,600.

ItemGuide price inc VAT
Lift and re-lay on a sound base£40–£85 per m²
Small repair (a few blocks or a short trench)£215–£700
Sunken or rutted patch repaired£320–£1,300
Lift and re-lay with sub-base rebuilt£65–£120 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Sub-base repaired or rebuilt where needed
  • Jointing sand and compaction
  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Lifting, cleaning and stacking
  • New screeded laying course

Before we price your lift and re-lay job

  • Replacement blocks or hidden blocks to swap in
  • Condition and thickness of your existing blocks
  • Whether a drain or gully is leaking under the paving
  • Trees, roots and past trenches
  • How much of the area needs lifting to blend the repair

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Lift and re-lay in Gillingham: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you repair block paving in Gillingham without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Do you cover Rochester, Strood and Gravesend?

Yes. We cover Gillingham and the places around it, including Rochester, Strood and Gravesend, and the rest of Kent.

Lift and re-lay near Gillingham

Nearby towns we cover for lift and re-lay, and lift and re-lay across Kent:

Other block paving services in Gillingham

Or see all block paving services in Gillingham.

Next step

Get a guide price in two minutes

Ready to talk about your lift and re-lay job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote