Planning a sunken area repair in Beverley
In Beverley, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.
How much does a sunken area repair cost in Beverley?
In Yorkshire and the Humber, a sunken area repair usually costs £270–£1,100 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £270–£1,100 |
| Small repair (a few blocks or a short trench) | £180–£590 |
| Lift and re-lay on a sound base | £30–£70 per m² |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sunken paving service
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- Investigation of the cause (drain, sub-base, laying course, edging)
- Sub-base dug out and rebuilt where it has failed
- Blocks lifted, cleaned and stacked for re-use
- New laying course screeded to the correct level and falls
- Same blocks relaid, re-jointed and compacted
What we look at first in Beverley
- Condition and thickness of your existing blocks
- Whether a drain or gully is leaking under the paving
- Replacement blocks or hidden blocks to swap in
- Falls, so water does not collect again
- What caused the dip or movement: base, laying course, edging or drains
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sunken paving in Beverley: questions
How much does a sunken area repair cost in Beverley?
Our guide is £270–£1,100 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you repair block paving in Beverley without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Sunken paving near Beverley
Nearby towns we cover for sunken paving, and sunken paving across East Riding of Yorkshire:
- Sunken paving in Hull
- Sunken paving in Brough
- Sunken paving in Driffield
- Sunken paving in Bridlington
- Sunken paving in Goole
