Planning a block paving cleaning job in Beverley
In Beverley, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.
How much does a block paving cleaning job cost in Beverley?
In Yorkshire and the Humber, a block paving cleaning job usually costs £2.50–£4.50 per m² including VAT. For a 50 m² drive, that is roughly £115–£225. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
| Sealing only | £4.50–£14 per m² |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Optional biocide and sealer
- Rinse down of edges, steps and walls
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rotary surface clean at a pressure that will not blow out the joints
- Pre-treatment where needed
What we look at first in Beverley
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Cleaning in Beverley: questions
How much does a block paving cleaning job cost in Beverley?
Guide price for Beverley: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Hull, Brough and Driffield?
Yes. We cover Beverley and the places around it, including Hull, Brough and Driffield, and the rest of the East Riding of Yorkshire.
Cleaning near Beverley
Nearby towns we cover for cleaning, and cleaning across East Riding of Yorkshire:
