Planning a lift and re-lay job in Beverley
Homes in Beverley include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.
How much does a lift and re-lay job cost in Beverley?
In Yorkshire and the Humber, a lift and re-lay job usually costs £30–£70 per m² including VAT. For 30 m² re-laid, that is roughly £950–£2,150. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £30–£70 per m² |
| Small repair (a few blocks or a short trench) | £180–£590 |
| Sunken or rutted patch repaired | £270–£1,100 |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our lift and re-lay service
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- Survey of the blocks: thickness, damage and whether they are worth re-using
- Sub-base repaired or rebuilt where needed
- Blocks relaid, new cuts made, edges re-set
- New screeded laying course
- Lifting, cleaning and stacking
How we find the cause
- Whether the edging has moved or was never set in concrete
- Whether a drain or gully is leaking under the paving
- Replacement blocks or hidden blocks to swap in
- Condition and thickness of your existing blocks
- What caused the dip or movement: base, laying course, edging or drains
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Lift and re-lay in Beverley: questions
How much does a lift and re-lay job cost in Beverley?
Our guide is £30–£70 per m² including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Do you cover Hull, Brough and Driffield?
Yes. We cover Beverley and the places around it, including Hull, Brough and Driffield, and the rest of the East Riding of Yorkshire.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Lift and re-lay near Beverley
Nearby towns we cover for lift and re-lay, and lift and re-lay across East Riding of Yorkshire:
- Lift and re-lay in Hull
- Lift and re-lay in Brough
- Lift and re-lay in Driffield
- Lift and re-lay in Bridlington
- Lift and re-lay in Goole
