Replacing tarmac or concrete with block paving in Washington: the local picture
Washington is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a replacement block drive cost in Washington?
Guide price in Washington: £85–£160 per m² including VAT, which puts a 45 m² replacement drive at about £3,850–£7,300. These are North East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £85–£160 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
Before we price your replacement block drive
- Edges against lawns, beds, walls and neighbours
- Trees and roots near the drive
- Block range, thickness, colour and pattern to suit the house
- The kerb: is it already dropped, and is it wide enough?
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Washington
Washington is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Replace an old drive in Washington: questions
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a replacement block drive in Washington?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Do you cover Felling, Houghton-le-Spring and Hebburn?
Yes. We cover Washington and the places around it, including Felling, Houghton-le-Spring and Hebburn, and the rest of Tyne and Wear.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Replace an old drive near Washington
Nearby towns we cover for replace an old drive, and replace an old drive across Tyne and Wear:
- Replace an old drive in Felling
- Replace an old drive in Houghton-le-Spring
- Replace an old drive in Hebburn
- Replace an old drive in Sunderland
- Replace an old drive in Jarrow
- Replace an old drive in Wallsend
