Permeable block paving in Washington: the local picture
Homes in Washington include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a permeable block drive cost in Washington?
For Washington, our guide is £95–£155 per m² including VAT, so a 50 m² drive is likely to be £4,750–£7,650. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £95–£155 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Ground check: how well the soil drains and how high the water table sits
- Edge restraints and any overflow or outlet the design needs
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
- Open-graded crushed stone (no fines) laid and compacted in layers
What we check on a Washington survey
- Where an electric vehicle charger cable might run
- Edges against lawns, beds, walls and neighbours
- The kerb: is it already dropped, and is it wide enough?
- Block range, thickness, colour and pattern to suit the house
- Where rain will go: falls, lawn, border, channel or soakaway
Do you need permission in Washington?
Washington is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Permeable paving in Washington: questions
How much does a permeable block drive cost in Washington?
Our guide for Washington is £95–£155 per m² including VAT, so a 50 m² drive is usually about £4,750–£7,650. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a permeable block drive in Washington?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Washington?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Permeable paving near Washington
Nearby towns we cover for permeable paving, and permeable paving across Tyne and Wear:
- Permeable paving in Felling
- Permeable paving in Houghton-le-Spring
- Permeable paving in Hebburn
- Permeable paving in Sunderland
- Permeable paving in Jarrow
- Permeable paving in Wallsend
