Planning a permeable block drive in Wallsend
Homes in Wallsend include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a permeable block drive cost in Wallsend?
In the North East, a permeable block drive usually costs £95–£155 per m² including VAT. For a 50 m² drive, that is roughly £4,750–£7,650. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £95–£155 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Deeper dig-out for the open-graded sub-base
- Ground check: how well the soil drains and how high the water table sits
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
What the survey covers
- Existing manhole and inspection covers, and whether to recess them
- Where rain will go: falls, lawn, border, channel or soakaway
- Whether front-garden planning rules apply
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Steps, thresholds and door heights
Do you need permission in Wallsend?
Wallsend is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Permeable paving in Wallsend: questions
Do I need planning permission for a permeable block drive in Wallsend?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Is the survey in Wallsend free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Wallsend?
Our guide for Wallsend is £95–£155 per m² including VAT, so a 50 m² drive is usually about £4,750–£7,650. Your fixed price follows the survey.
Permeable paving near Wallsend
Nearby towns we cover for permeable paving, and permeable paving across Tyne and Wear:
- Permeable paving in Hebburn
- Permeable paving in Jarrow
- Permeable paving in Felling
- Permeable paving in Gosforth
- Permeable paving in Newcastle upon Tyne
- Permeable paving in South Shields
