Surrey · Replace an old drive

Replacing tarmac or concrete with block paving in Reigate

Thinking about replacement block drives in Reigate? We survey, specify and build them for homeowners across Reigate and the surrounding RH postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes RH2, RH3, RH5
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Reigate

In and around Reigate, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a replacement block drive cost in Reigate?

Guide price in Reigate£105–£195 per m²Including VAT at 20%

Most replacement block drive quotes in the South East fall within £105–£195 per m² including VAT. A 45 m² replacement drive would usually be about £4,600–£8,750, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Levels set below the damp-proof course with falls away from the house
  • Drainage added where the old drive sent water to the house or road
  • Assessment of the old base: keep, top up or replace
  • New edging, sub-base where needed, and the block drive

What the survey covers

  • The kerb: is it already dropped, and is it wide enough?
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Whether front-garden planning rules apply
  • Access for a mini-digger, skip or grab lorry
  • Ground conditions under the old surface and how deep the sub-base must be

Do you need permission in Reigate?

Reigate is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Replace an old drive in Reigate: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

How much does a replacement block drive cost in Reigate?

Our guide for Reigate is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Is the survey in Reigate free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Replace an old drive near Reigate

Nearby towns we cover for replace an old drive, and replace an old drive across Surrey:

Other block paving services in Reigate

Or see all block paving services in Reigate.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote