Surrey · Replace an old drive

Replacing tarmac or concrete with block paving in Redhill

Planning a replacement block drive in Redhill? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes RH1
  • £105–£195 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Redhill

Homes in Redhill include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a replacement block drive cost in Redhill?

Guide price in Redhill£105–£195 per m²Including VAT at 20%

In the South East, a replacement block drive usually costs £105–£195 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,600–£8,750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace

What we check on a Redhill survey

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Where an electric vehicle charger cable might run
  • Existing manhole and inspection covers, and whether to recess them
  • Ground conditions under the old surface and how deep the sub-base must be
  • Edges against lawns, beds, walls and neighbours

Planning and kerb rules in Redhill

Redhill is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Replace an old drive in Redhill: questions

Is the survey in Redhill free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Can you match the blocks to my house in Redhill?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How much does a replacement block drive cost in Redhill?

Our guide for Redhill is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.

Replace an old drive near Redhill

Nearby towns we cover for replace an old drive, and replace an old drive across Surrey:

Other block paving services in Redhill

Or see all block paving services in Redhill.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote