What to know before a replacement block drive in Banbury
Banbury is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a replacement block drive cost in Banbury?
Most replacement block drive quotes in the South East fall within £105–£195 per m² including VAT. A 45 m² replacement drive would usually be about £4,600–£8,750, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £105–£195 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Break-out of the old surface with waste removal and skip or grab lorry
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
What we check on a Banbury survey
- The kerb: is it already dropped, and is it wide enough?
- Trees and roots near the drive
- Ground conditions under the old surface and how deep the sub-base must be
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Where rain will go: falls, lawn, border, channel or soakaway
Planning and kerb rules in Banbury
Banbury is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Replace an old drive in Banbury: questions
Do I need planning permission for a replacement block drive in Banbury?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Is the survey in Banbury free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a replacement block drive cost in Banbury?
Our guide for Banbury is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.
Replace an old drive near Banbury
Nearby towns we cover for replace an old drive, and replace an old drive across Oxfordshire:
