Oxfordshire · Cleaning

Block paving cleaning in Banbury

Tired block paving in Banbury rarely needs replacing. A deep clean, fresh jointing sand and, if you want it, a sealer, make most drives look years younger.

  • Postcodes OX16, OX15
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Banbury: the local picture

In Banbury, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving cleaning job cost in Banbury?

Guide price in Banbury£2.50–£5.50 per m²Including VAT at 20%

Guide price in Banbury: £2.50–£5.50 per m² including VAT, which puts a 50 m² drive at about £135–£270. These are South East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints
  • Weeds and moss removed from the joints
  • Optional biocide and sealer
  • Pre-treatment where needed

What we look at first in Banbury

  • Type of block and its age
  • Whether any blocks are loose or sunken first
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Walls, doors and planting to protect
  • How much joint sand is left

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Cleaning in Banbury: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving cleaning job cost in Banbury?

Guide price for Banbury: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Do you cover Bicester, Witney and Oxford?

Yes. We cover Banbury and the places around it, including Bicester, Witney and Oxford, and the rest of Oxfordshire.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Cleaning near Banbury

Nearby towns we cover for cleaning, and cleaning across Oxfordshire:

Other block paving services in Banbury

Or see all block paving services in Banbury.

Next step

Get a guide price in two minutes

Ready to talk about your block paving cleaning job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote