Planning a block paving cleaning job in Oxford
Oxford has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a block paving cleaning job cost in Oxford?
Expect block paving cleaning jobs in Oxford to come in at around £2.50–£5.50 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £135 and £270.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
| Sealing only | £5.50–£16 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.
- Weeds and moss removed from the joints
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rinse down of edges, steps and walls
Before we price your block paving cleaning job
- Whether any blocks are loose or sunken first
- Which sealer finish suits a slope or patio
- How much joint sand is left
- Shade and drainage, which affect regrowth
- Type of block and its age
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Cleaning in Oxford: questions
How often should block paving in Oxford be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving cleaning job cost in Oxford?
Guide price for Oxford: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Cleaning near Oxford
Nearby towns we cover for cleaning, and cleaning across Oxfordshire:
