England · Cleaning

Block paving cleaning in Oxfordshire

Green, weedy or faded block paving in Oxfordshire? Our block paving cleaning service brings it back without blasting the joints out, then puts the sand back.

  • 6 towns listed
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

How much does a block paving cleaning job cost in Oxfordshire?

Guide price in Oxfordshire£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the South East fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £135–£270, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026.

Towns we cover in Oxfordshire

Choose a town for local prices and details for cleaning:

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Rotary surface clean at a pressure that will not blow out the joints
  • Rinse down of edges, steps and walls
  • Pre-treatment where needed
  • Optional biocide and sealer

How we find the cause

  • Which sealer finish suits a slope or patio
  • Shade and drainage, which affect regrowth
  • Type of block and its age
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Whether any blocks are loose or sunken first

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Cleaning in Oxfordshire: questions

Do you cover Oxford, Banbury and Abingdon?

Yes. We cover all of Oxfordshire, including Oxford, Banbury and Abingdon.

How much does a block paving cleaning job cost in Oxfordshire?

Guide price for Oxfordshire: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How often should block paving in Oxfordshire be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote