How much does a replacement block drive cost in Norfolk?
Most replacement block drive quotes in the East of England fall within £100–£190 per m² including VAT. A 45 m² replacement drive would usually be about £4,500–£8,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £100–£190 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026.
Towns we cover in Norfolk
Choose a town for local prices and details for replace an old drive:
What does a replacement block drive involve?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.
- Assessment of the old base: keep, top up or replace
- Drainage added where the old drive sent water to the house or road
- New edging, sub-base where needed, and the block drive
- Levels set below the damp-proof course with falls away from the house
- Break-out of the old surface with waste removal and skip or grab lorry
What the survey covers
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Edges against lawns, beds, walls and neighbours
- Where rain will go: falls, lawn, border, channel or soakaway
- Access for a mini-digger, skip or grab lorry
- Steps, thresholds and door heights
Rules for front drives in Norfolk
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Replace an old drive in Norfolk: questions
How much does a replacement block drive cost in Norfolk?
Our guide for Norfolk is £100–£190 per m² including VAT, so a 45 m² replacement drive is usually about £4,500–£8,500. Your fixed price follows the survey.
Do I need planning permission for a replacement block drive in Norfolk?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do you cover Norwich, Great Yarmouth and King's Lynn?
Yes. We cover all of Norfolk, including Norwich, Great Yarmouth and King's Lynn.
