How much does a replacement block drive cost in Cambridgeshire?
Expect replacement block drives in Cambridgeshire to come in at around £100–£190 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,500 and £8,500.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £100–£190 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026.
Towns we cover in Cambridgeshire
Choose a town for local prices and details for replace an old drive:
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
- Assessment of the old base: keep, top up or replace
What the survey covers
- Whether front-garden planning rules apply
- Steps, thresholds and door heights
- Where an electric vehicle charger cable might run
- Access for a mini-digger, skip or grab lorry
- Edges against lawns, beds, walls and neighbours
Rules for front drives in Cambridgeshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Replace an old drive in Cambridgeshire: questions
How much does a replacement block drive cost in Cambridgeshire?
Our guide for Cambridgeshire is £100–£190 per m² including VAT, so a 45 m² replacement drive is usually about £4,500–£8,500. Your fixed price follows the survey.
Is the survey in Cambridgeshire free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover Peterborough, Cambridge and Wisbech?
Yes. We cover all of Cambridgeshire, including Peterborough, Cambridge and Wisbech.
