Planning a replacement block drive in Thetford
Around Thetford, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.
How much does a replacement block drive cost in Thetford?
Guide price in Thetford: £100–£190 per m² including VAT, which puts a 45 m² replacement drive at about £4,500–£8,500. These are East of England guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £100–£190 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Assessment of the old base: keep, top up or replace
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
- New edging, sub-base where needed, and the block drive
What we check on a Thetford survey
- Block range, thickness, colour and pattern to suit the house
- Edges against lawns, beds, walls and neighbours
- Where rain will go: falls, lawn, border, channel or soakaway
- Existing manhole and inspection covers, and whether to recess them
- Ground conditions under the old surface and how deep the sub-base must be
Rules for front drives in Thetford
Thetford is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Replace an old drive in Thetford: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a replacement block drive in Thetford?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How much does a replacement block drive cost in Thetford?
Our guide for Thetford is £100–£190 per m² including VAT, so a 45 m² replacement drive is usually about £4,500–£8,500. Your fixed price follows the survey.
Do you cover Dereham and Bury St Edmunds?
Yes. We cover Thetford and the places around it, including Dereham and Bury St Edmunds, and the rest of Norfolk.
Replace an old drive near Thetford
Nearby towns we cover for replace an old drive, and replace an old drive across Norfolk:
