Merseyside · Replace an old drive

Replacing tarmac or concrete with block paving in Prescot

We quote replacement block drives throughout Prescot and Merseyside. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes L34, L35
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Prescot

In Prescot, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a replacement block drive cost in Prescot?

Guide price in Prescot£95–£180 per m²Including VAT at 20%

Expect replacement block drives in Prescot to come in at around £95–£180 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,300 and £8,100.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Assessment of the old base: keep, top up or replace
  • Levels set below the damp-proof course with falls away from the house
  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry

What we check on a Prescot survey

  • Where an electric vehicle charger cable might run
  • Block range, thickness, colour and pattern to suit the house
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Whether front-garden planning rules apply
  • Steps, thresholds and door heights

Planning and kerb rules in Prescot

Prescot is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Replace an old drive in Prescot: questions

How much does a replacement block drive cost in Prescot?

Our guide for Prescot is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Prescot?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Prescot free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Replace an old drive near Prescot

Nearby towns we cover for replace an old drive, and replace an old drive across Merseyside:

Other block paving services in Prescot

Or see all block paving services in Prescot.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Prescot.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote