Replacing tarmac or concrete with block paving in Halewood: the local picture
Halewood is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a replacement block drive cost in Halewood?
Most replacement block drive quotes in the North West fall within £95–£180 per m² including VAT. A 45 m² replacement drive would usually be about £4,300–£8,100, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
- New edging, sub-base where needed, and the block drive
What we check on a Halewood survey
- Where an electric vehicle charger cable might run
- Where rain will go: falls, lawn, border, channel or soakaway
- Existing manhole and inspection covers, and whether to recess them
- Ground conditions under the old surface and how deep the sub-base must be
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Do you need permission in Halewood?
Halewood is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Replace an old drive in Halewood: questions
How much does a replacement block drive cost in Halewood?
Our guide for Halewood is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Do I need planning permission for a replacement block drive in Halewood?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Halewood?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Replace an old drive near Halewood
Nearby towns we cover for replace an old drive, and replace an old drive across Merseyside:
- Replace an old drive in Speke
- Replace an old drive in Garston
- Replace an old drive in Huyton
- Replace an old drive in Prescot
- Replace an old drive in Liverpool
- Replace an old drive in St Helens
