Merseyside · Block paved driveways

Block paving driveways in Halewood

From L26, L25 to the villages around Halewood, we quote block paved driveways built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes L26, L25
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Planning a block paved driveway in Halewood

Around Halewood, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a block paved driveway cost in Halewood?

Guide price in Halewood£85–£140 per m²Including VAT at 20%

Most block paved driveway quotes in the North West fall within £85–£140 per m² including VAT. A 50 m² double drive would usually be about £4,250–£7,000, with any extras listed separately on your quote.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paved driveway involve?

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Survey, measurements and a written, itemised quote
  • Cuts at edges, around covers and against the house
  • Sharp-sand laying course screeded to falls
  • Edge restraints or kerbs bedded and haunched in concrete
  • Removal of the old surface and soil to the agreed depth, with waste taken away

Before we price your block paved driveway

  • Trees and roots near the drive
  • Where an electric vehicle charger cable might run
  • Block range, thickness, colour and pattern to suit the house
  • Edges against lawns, beds, walls and neighbours
  • The kerb: is it already dropped, and is it wide enough?

Planning and kerb rules in Halewood

Halewood is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Block paved driveways in Halewood: questions

Do you cover Speke, Garston and Huyton?

Yes. We cover Halewood and the places around it, including Speke, Garston and Huyton, and the rest of Merseyside.

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Halewood?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Block paved driveways near Halewood

Nearby towns we cover for block paved driveways, and block paved driveways across Merseyside:

Other block paving services in Halewood

Or see all block paving services in Halewood.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Halewood.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote