Lincolnshire · Replace an old drive

Replacing tarmac or concrete with block paving in Gainsborough

Planning a replacement block drive in Gainsborough? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes DN21
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Gainsborough

Gainsborough is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.

How much does a replacement block drive cost in Gainsborough?

Guide price in Gainsborough£95–£180 per m²Including VAT at 20%

Expect replacement block drives in Gainsborough to come in at around £95–£180 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,300 and £8,100.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Levels set below the damp-proof course with falls away from the house
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace
  • New edging, sub-base where needed, and the block drive
  • Drainage added where the old drive sent water to the house or road

What we check on a Gainsborough survey

  • Existing manhole and inspection covers, and whether to recess them
  • The kerb: is it already dropped, and is it wide enough?
  • Trees and roots near the drive
  • Ground conditions under the old surface and how deep the sub-base must be
  • Block range, thickness, colour and pattern to suit the house

Planning and kerb rules in Gainsborough

Gainsborough is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Replace an old drive in Gainsborough: questions

Do you cover Scunthorpe, Lincoln and Retford?

Yes. We cover Gainsborough and the places around it, including Scunthorpe, Lincoln and Retford, and the rest of Lincolnshire.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Can you match the blocks to my house in Gainsborough?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Replace an old drive near Gainsborough

Nearby towns we cover for replace an old drive, and replace an old drive across Lincolnshire:

Other block paving services in Gainsborough

Or see all block paving services in Gainsborough.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote