Planning a replacement block drive in Ryde
In and around Ryde, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
Work in the Isle of Wight is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a replacement block drive cost in Ryde?
In the South East, a replacement block drive usually costs £105–£195 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,600–£8,750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £105–£195 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
- Assessment of the old base: keep, top up or replace
What the survey covers
- Ground conditions under the old surface and how deep the sub-base must be
- Access for a mini-digger, skip or grab lorry
- Where an electric vehicle charger cable might run
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Ryde
Ryde is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Replace an old drive in Ryde: questions
Do I need planning permission for a replacement block drive in Ryde?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a replacement block drive cost in Ryde?
Our guide for Ryde is £105–£195 per m² including VAT, so a 45 m² replacement drive is usually about £4,600–£8,750. Your fixed price follows the survey.
Can you match the blocks to my house in Ryde?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Replace an old drive near Ryde
Nearby towns we cover for replace an old drive, and replace an old drive across Isle of Wight:
- Replace an old drive in Sandown
- Replace an old drive in Newport, Isle of Wight
- Replace an old drive in Cowes
