England · Replace an old drive

Replacing tarmac or concrete with block paving in Isle of Wight

Planning a replacement block drive in Isle of Wight? Start with photos or a survey by arrangement: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • 4 towns listed
  • £105–£195 per m² inc VAT
  • By arrangement
Driveway half old cracked tarmac and half new brindle herringbone block paving

How much does a replacement block drive cost in Isle of Wight?

Guide price in Isle of Wight£105–£195 per m²Including VAT at 20%

Guide price in Isle of Wight: £105–£195 per m² including VAT, which puts a 45 m² replacement drive at about £4,600–£8,750. These are South East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£105–£195 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026.

Towns we cover in Isle of Wight

Choose a town for local prices and details for replace an old drive:

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace
  • Levels set below the damp-proof course with falls away from the house
  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive

What the survey covers

  • Where rain will go: falls, lawn, border, channel or soakaway
  • Access for a mini-digger, skip or grab lorry
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Where an electric vehicle charger cable might run
  • Steps, thresholds and door heights

Rules for front drives in Isle of Wight

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Replace an old drive in Isle of Wight: questions

Can you match the blocks to my house in Isle of Wight?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Isle of Wight free?

In the Isle of Wight we cover jobs by arrangement. We will confirm before any visit whether a charge applies, and many jobs can be priced from photos first.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then send it to us for a price from photos or a survey by arrangement. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote